Westinghouse WP2500 Manual Del Propietário página 20

ASSEMBLY
8. Install the spray gun bracket using the two spray
gun bracket nuts and bolts (M6). Tighten securely
(see Figure 22).
6
4
Figure 22 – Installing Spray Gun Bracket and Hose
1 - Spray Gun
Bracket
2 - Spray Gun
Bracket Nuts
(M6)
3 - Spray Gun
Bracket Bolts
(M6 x 45 mm)
9. Install the hose bracket using the two hose bracket
nuts and bolts (M6). Tighten securely (see Figure
22).
20
2
5
Bracket
4 - Hose Bracket
5 - Hose Bracket
Nuts M6
6 - Hose Bracket
Bolts (M6 x
10 mm)
10. Connect the wand to the spray gun and turn the
fi tting counterclockwise to tighten (see Figure 23).
Do not overtighten. The fi tting only needs to be
hand-tight.
1
3
Figure 23 – Connecting Spray Wand
1 - Fitting
11. Inspect the O-rings on both sides of the high-
pressure hose. Moisten the O-rings with water (see
Figure 24).
Figure 24 – High-Pressure Hose O-Rings
12. Connect the high-pressure hose to the pump and
tighten the hose fi tting (see Figure 25). Do not
overtighten. The fi tting only needs to be hand-tight.
1 2
2 - Spray Wand