Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Stopping the Pressure Washer
Normal Operation
During normal operation, use the following steps to stop
your pressure washer:
1. Lock the spray gun trigger lock in the OFF position.
2. Move the engine ON/OFF switch to the OFF (O)
position (see Figure 43).
Figure 43 – Engine ON/OFF Switch OFF Position
32
3. Close the fuel shutoff valve (see Figure 44).
Figure 44 – Closing Fuel Shutoff Valve
4. Turn the water supply off.
5. Unlock the spray gun trigger and squeeze the
trigger to release any pressure in the hoses and
pump.
6. Disconnect the garden hose from the water inlet.
During an Emergency
If there is an emergency and the pressure washer must
be stopped quickly, push the engine control switch to
the OFF (O) position immediately.
Publicidad
