Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance (continued)
Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in accordance with national and local codes.
CIRCUIT DIAGRAM
WARNING: Disconnect power before servicing.
Disconnect power before servicing.
Any electrical re-wiring of this appliance must be done by a qualified electrician. This wiring must be done in
accordance with local codes and/or in Canada with the current CSA C22.1 Canadian Electrical Code, and for US
installations, the National Electrical Code ANSI/NFPA NO 70.
If repairing or replacing any electrical component or wiring, the original wire routing, color coding and securing
locations must be followed.
Care & Cleaning
Always turn the heater OFF and unplug the power cord from the outlet before cleaning.
Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
To maintain the finish, clean with a soft, slightly damp cloth and buff with a dry cloth. Never use abrasive cleansers, liquid sprays, or
any cleaner that could scratch the surface.
Wood furniture should never be dragged across a floor. The added stress from dragging the unit may cause the dragged edge to
splinter, or it may cause a joint to loosen.
DANGER
12
Publicidad
