Publicidad
Idiomas disponibles
Idiomas disponibles
compost into the soil. Loosen the
soil first. Evenly apply compost
or fertiliser to your useable sur-
face and work it in evenly with
the appliance. To do so, the
appliance can be moved loosely
in forwards, circular or pulling
movements.
9. Maintenance / care / storage
Accidents and appliance mal-
functions can be avoided by car-
rying out regular inspections (firm
seating of screwed connections,
cracks, damage) and by replay-
ing damaged or worn parts.
The appliance is mainly mainte-
nance-free. Switch the appliance
off if clods of earth or plant
residue should become trapped
in the tines when working with
the appliance. Hold the appli-
ance as close to the soil as pos-
sible and allow it to start up
briefly. The soiling loosens itself
10. Troubleshooting
General
Faults usually occur if the unit
has not been handled, cared for
or maintained properly. The fol-
lowing table contains the most
common faults and remedies to
eliminate these faults. If you
have any other problems, please
contact your nearest service cen-
tre authorised by the manufac-
turer, or your nearest authorised
specialist dealer.
Fault
The appliance is switched on,
the spike-tooth discs do not
rotate.
Caring for lawn edges
(Fig. 18 a/b)
The appliance quickly and com-
fortably removes lawn sods
together with the roots, thereby
bringing your lawn and bed
edges in top form. To do so,
hold the appliance in the work-
ing position, slowly insert it on
the lawn sod from above and
as a result of the oscillating rota-
tional movement. Remove
residue manually if necessary.
Caution! Before carrying
A
out any work, inspection,
cleaning and repair work, switch
the appliance off and remove
the plug. Risk of injury!
Ensure that the air ports in the
motor cover and in the guide
handle are free from soiling.
Remove soil and dirt residue
with a dry cloth or brush.
Caution! Repairs that
A
require specialist
knowledge must only be carried
out by an authorised specialist.
Caution! For safety reasons,
A
only use original spare
parts supplied by the manufac-
turer or parts that have been
authorised by the manufacturer.
We expressly point out that in
accordance with product liability
Remedy
Check whether the power supply is interrupted, the extension cable is
fully in order and the mains socket conducts electricity. Please contact
your stockist or Brill Service direct if this does not solve the problem.
pull the appliance in your direc-
tion. Remove the appliance and
repeat the action until the lawn
has become loose. You now only
have to collect the removed
grass. To easily clean bed edges
and borders, guide the appli-
ance along g the lawn edge.
Working in pulling movements or
slowly guide the appliance back
and forth.
Repairs are only to by carried
out by Brill Service or by autho-
rised Brill dealers.
Due to the risk of personal injury
and material damage: do not
clean the appliance under flow-
ing water; especially not under
high pressure.
Store the appliance in a dry
place where it is protected from
frost. The storage place should
not be accessible by children.
laws, we are not liable for any
damage caused by our units if
this damage is due to improper
repair or if parts exchanged are
not our original parts or parts
approved by us, and if the repairs
were not carried out at service
centre authorised by the manu-
facturer or by an authorised
specialist. The same applies to
spare parts and accessories.
GB
21
Publicidad
