Publicidad
Idiomas disponibles
Idiomas disponibles
Replacement of the remote control batteries
• Press the retaining clip on the battery compartment of the remote control and slide
off the cover in the direction of the arrow.
• Replace the old batteries with two LR03 batteries. Make sure that the polarity is
correct.
• Put the battery cover back on.
Note: The distance between the signal generator and the signal receiver must not be
more than 8 metres.
signal sender
IR transmitter
Insert
reinstall
Cover of battery box
Battery compartment cover
• If the signal in the room is disturbed by fluorescent lights, neon lamps or mobile
phones, move the remote control closer to the device.
• Replace the batteries with the same type.
• Remove the batteries if you will not be using the remote control for a long time.
• If the display on the remote control becomes blurred or shows nothing, replace the
batteries.
battery
Batteries
remove
Remove
EN
45
Publicidad
