Publicidad
Idiomas disponibles
Idiomas disponibles
EN
54
ERROR CODES
H8
Chassis is full of water.
Malfunction of ambient
F1
temperature sensor.
Malfunction
F2
of evaporator
temperature sensor.
Refrigerant is leaking
F0
or system is blocked.
Overload protection
H3
for compressor.
Overload malfunction.
E8
F4
Outdoor tube
temperature sensor is
open/short-circuited.
Pour out the water inside chassis. If „H8" still exits,
please contact professional person to maintain the
unit.
Please contact professional person to deal with it.
Please contact professional person to deal with it.
Re-energize the unit after turning off and pulling
out the plug for 30 min; If there's still malfunction,
please contact after- sales service.
Check if the unit is under high-temperature and
high- humidity environment; if ambient temperature
is too high, power off the unit and then energize it
for operation after the ambient temperature drops
to 35 °C below
Check if the evaporator and condenser are
blocked by some objects; if yes, take away the
objects, power off the unit and then energize it
for operation. If the malfunction still occur, please
contact our after-sales service center.
Please contact professional person to deal with it.
Publicidad
