Descargar Imprimir esta página

Whirlpool ADN 201/1 Manual De Instrucciones página 8

Ocultar thumbs Ver también para ADN 201/1:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 58
The appliance must stand on a level surface and must not touch the wall. If necessary,
regulate the height of the appliance by adjusting the levelling feet: by turning them
clockwise – the front of the appliance rises, by turning them counter clockwise – it comes
down. If the appliance is tilted slightly backward – the doors will close by themselves.
The temperature in the refrigerator compartment is controlled using the thermostat
knob 2 (see fig. 1) by turning it to one side or the other. The temperature indication in
digits is shown beside the thermostat knob. When the door is closed, the temperature
setting can be seen on the thermostat indicator display 3 (see fig. 1, page 1).
The temperature is regulated on the scale of five digits.
0 = Compressor is switched off WARNING! Electric current is not switched off.
1 = highest temperature (lowest cooling)
5 = lowest temperature (highest cooling)
If foodstuffs in the refrigerator compartment are too cold, set the thermostat knob to 1,
2 or 3. If foodstuffs in the refrigerator compartment are not being chilled sufficiently,
set the thermostat knob to 4 or 5. Please set the desired temperature in the appliance
according to your own requirements.
THE TEMPERATURE IN THE REFRIGERATOR COMPARTMENT MAY VARY
DEPENDING ON AMBIENT TEMPERATURE, THE AMOUNT OF FOODSTUFFS, THE
TEMPERATURE OF THE FOODSTUFFS, AND HOW OFTEN THE APPLIANCE
DOORS ARE OPENED AND CLOSED.
IF THE ROOM IS COOL, THE APPLIANCE COOLS LESS. THE TEMPERATURE IN
THE APPLIANCE MAY THEREFORE RISE. Use the thermostat wheel to set a lower
temperature.
THE REFRIGERATOR COMPARTMENT DEFROSTS AUTOMATICALLY. Drops of ice that
form on the back wall of the refrigerator compartment thaw during the time the
compressor is not working and the thaw water runs down the thaw water runoff
channel to the tray on top of the compressor, where it evaporates.
REGULARLY CLEAN THE APPLIANCE.
Remember that before cleaning the back part of the appliance body
you must disconnect the appliance from the electrical energy supply
socket by pulling the plug out of the electricity outlet.
Protect the appliance inner surfaces and plastic parts from fats, acids
and sauces. In case of accidental spills – immediately clean with warm
soapy water or dishwashing detergent.
surfaces.
Regularly clean the hermetic gaskets of the doors. Wipe dry.
REGULARLY CLEAN THE THAW WATER CHANNEL SPACE WITH A
SPECIAL CLEANER 8 FOR THAT PURPOSE (see fig. 1, page 1).
At least once a year clean dust away from the back part of the
appliance body and the compressor. A soft brush, electrostatic cloth or
vacuum cleaner may be used for cleaning.
TEMPERATURE REGULATION
DEFROSTING, CLEANING AND CARE
Wipe dry inner and outer
7

Publicidad

loading