Buhnen HB 325 Instrucciones De Servicio página 8

General
1 General
Before first operating the HB 325 adhesive pistol, please read this operating
manual carefully and thoroughly through. Please pay special attention to the
safety information in chapter 2.
This operating manual must be available to every user.
All position numbers stated in this operating manual (e.g. "nozzle (1)") apply
to the figure on page 2.
1.1 Scope of application
The HB 325 is intended for use with hot-melt adhesive in candle form
(correct intended use).
Any other usage is unauthorized.
1.2 Specifications
Description
Included in delivery
Dimensions [mm]
Weight [g]
Operational voltage [V AC]
Power consumption [W]
Insulating Class
Safety class
Working temperature [°C]
Controller
Adhesive
Adhesive performance [kg/h*]
* depending on temperature and adhesive viscosity
1.3 Device elements
All manuals and user guides at all-guides.com
HB 325
adhesive pistol, spare nozzle, screwdriver,
instruction handbook
330 x 250 x 80
1,010
220...240, 50 Hz
600
1
IP20
140...230, preset to 180...190
bimetallic temperature regulator
BÜHNEN hot-melt adhesive in candle form,
Ø 18 mm
1.4...2.0
1 Melting nozzle
2
Stand
3
Adjusting screw for discharge speed
4 Trigger
5
On/Off switch
6
Power cable
7 Setting screw stroke limit
7a
Locknut stroke limit
8 Insulating sleeve
9
Screwdriver (included in delivery)

GB