Kärcher 1.348-190.0 Manual Del Usuario página 15

CAUTION
Pointer to a possibly dangerous
situation, which can lead to mi-
nor injuries.
ATTENTION
Pointer to a possibly dangerous
situation, which can lead to
property damage.
Description of the Appliance
Illustrations on fold-out pages!
 These operating instructions de-
scribe the multi-purpose vacuum
cleaners listed on the front cover.
 The illustrations show the maximum equipment;
depending on the model, there are differences in
equipment and supplied accessories.
When unpacking the product, make sure that no acces-
sories are missing and that none of the package con-
tents have been damaged. If you detect any transport
damages please contact your dealer.
included in the scope of delivery
possible accessories
Suction hose connection
Illustration
 To connect the suction hose during vacuuming.
ON/OFF switch for appliance
(without built-in socket)
Illustration
 Position I: Suction or blowing
Position 0: Appliance is switched off
ON/OFF switch for appliance
(with built-in socket)
Illustration
 Position MAX: Vacuuming or blowing.
 Position MAX: Vacuuming with connected
electric tool
 Performance regulation: Reduce the suction if nec-
essary during vacuuming, blowing or when working
with an electric tool.
 Position 0: The appliance is switched off. Electric
tool is supplied with voltage.
Machine socket
Note: Observe the maximum connected load (see
Chapter "Technical data").
Illustration
 To connect an electric tool.
Blowing connection
Illustration
 Connect the suction hose to the blower connection,
this will activate the blower function.
Filter cleaning button
Illustration
 For cleaning the flat pleated filter fitted.
Note: Do not operate the button when the flat pleated fil-
ter is wet.
Recessed grip
 After unlocking it, grab the appliance head by the
handle recess and remove it.
Carry handle
Illustration
 The carrying handle is also used to lock the appli-
ance head and the container. To unlock, push the
bow all the way forward until you clear the lock.
 Grab the appliance head by the handle recess and
remove it.
Filter box and release key
Illustration
H
2
Illustration
 In order to clean the filter, press the release key,
fold out and remove the filter box.
Accessory mount
Illustration
 The accessories compartment allows the storage
of suction pipes and suction nozzles on the appli-
ance.
Cable hook
Illustration
 To store the mains cable.
Parking position
Illustration
 To rest the floor nozzle during work interruptions.
Steering roller
Illustration
 Turn the container, press in the steering roller in the
openings at the base of the container till the end-
point.
Drain screw
Illustration
 The drain screw is used to quickly and comfortably
empty wastewater in the container. Tilt the contain-
er forward for easier emptying.
Filter bag
Illustration
Note: Do not use a filter bag for wet vacuuming!
Flat fold filter
(already installed in the appliance)
– 7
EN 15