english / USA
8
9
:
Set the choke lever (8):
g
g
g
g
For cold start to
For warm start to e
e
e
e
even if engine has been running but
is still cold
:
Press the fuel pump bulb (9) at least
five times, even if the bulb is still
filled with fuel.
18
8
:
Place the unit on the ground:
It must rest securely on the engine
support. Check that the tool is not
touching the ground or any other
obstacles – see also chapter
"Starting/Stopping the Engine" in
the CombiTool's instruction manual.
:
Make sure you have a firm footing.
:
Press the unit firmly against the
ground with your left hand on the fan
housing. Your thumb should be
under the fan housing.
Do not stand or kneel on the drive
tube!
:
Pull the starter grip slowly with your
right hand until you feel it engage –
and then give it a brisk strong pull.
Do not pull out starter rope to full
length – it might break.
:
Do not let the starter grip snap back
– guide it slowly into the housing so
that the starter rope can rewind
properly.
:
Crank the engine until it runs.
KM 85, KM 85 R