Publicidad
Idiomas disponibles
Idiomas disponibles
manually reconfirm the connection on the source device. The connection can be resumed from a previously paired source device
at any time, as the Bluetooth function continues to operate in the background regardless of the input selected on the sound deck,
and it is only switched off completely when the standby mode is selected.
If a connection has not already been made or the connection cannot be re-established, the sound deck will automatically activate
the ‚pairing mode' for a period of 180 seconds. To switch the sound deck to the pairing mode manually, briefly press the BT PAIR
button (Fig. 3, (8)) on the remote control. The blue LED status indicator will flash quickly whenever the pairing mode is active.
Now activate the Bluetooth mode on your source device. The sound deck will appear in the list of Bluetooth devices as „Sounddeck
700". If it is not displayed in the list, set your source device to search for Bluetooth devices manually and make sure that the
sound deck has been switched to the pairing mode.
Depending on the source device, you may be asked whether the password is to be accepted during the pairing procedure. You can
confirm this by simply pressing „Accept". If you are still asked for a password, use the default passwords „0000" or „1234". If you
are asked if you want to establish a connection after pairing, please select „Yes". When the device has been paired and connected
successfully the blue LED status indicator will illuminate continuously.
The sound deck supports the „aptX®" high quality audio transmission standard. If your source device also supports this standard,
„aptX®" will be selected automatically as the transfer mode when establishing a Bluetooth connection.
connecting the power supply to the sound deck:
Included in delivery is the most commonly used mains cable (E). The mains cable used in your country, however, may be different.
If the mains cable is not compatible with your power sockets or if you are in any doubt, please contact your Magnat dealer.
1. Insert the 2-pin mains cable into the socket (6) on the amplifier of the sound deck (Fig. 2).
2. Insert the mains cable into the socket. Make sure that you are using the mains plug that is compatible with the socket (refer
to the information above).
operatIon
Sound deck controls (front) (fig. 1):
(1) Sensor for remote control and led status display: Please aim at this sensor when using the remote control. The operating
status is indicated by the colour of the LED:
• red: Standby mode
• green: analogue input active
• purple: optical digital input active
• turquoise: coaxial digital input active
• blue: Bluetooth input active, connected to the source device
• blue, flashing quickly: Bluetooth input active, device in pairing mode
• flashing slowly: Mute mode active, device is muted
Sound deck controls (rear) (fig. 2):
(5) mains switch: After installation, use this switch to turn on the device. If the device is not going to be used for a prolonged
period, it should be switched off.
operation with the system remote control (fig. 3):
(7) on/Stby: Switches the device on when it is in the standby mode. If the LED (fig. 1 (1)) does not illuminate, actuate the power
switch ((fig. 2, (5)) located on the rear. Conversely the device can be switched from power operation to the standby mode.
(8) bt paIr: Switches the device to the pairing mode when in Bluetooth operation to establish a connection to a Bluetooth
source device. The blue LED status indicator (Fig. 1, (1)) flashes quickly.
(9) coaX: Switches the device to the digital coaxial input. The turquoise LED status indicator (Fig. 1, (1)) illuminates.
(10) lIne: Switches the device to the analogue stereo input. The green LED status indicator (Fig. 1, (1)) illuminates.
(11) bluetooth: Switches the device to the Bluetooth input. The blue LED status indicator (Fig. 1, (1)) flashes or illuminates (see
section System installation - Connecting to a Bluetooth audio source).
(12) opt: Switches the device to the optical digital input. The purple LED status indicator (Fig. 1, (1)) illuminates.
(13) Volume: Increases (+) or decreases (-) the volume.
(14) nIght Activates or deactivates a playback mode with reduced dynamics and a frequency response that is adapted for sound-
sensitive situations (e.g. late at night). When this mode is activated the LED status indicator (Fig. 1, (1)) will flash green
twice; when it is deactivated it will flash red twice.
(15) mute: Switches the sound on and off.
(16) Surr: Switches the 3D surround sound function on or off. When this mode is activated the LED status indicator (Fig. 1, (1))
will flash green twice; when it is deactivated it will flash red twice.
10
Publicidad
