KTM 63512923044 Instrucciones De Montaje página 27

5.1 Mounting
Warning
Danger of accidents Loading luggage can significantly affect the handling characteristics.
–
When the cases are fitted, the handling characteristics, as well as the cornering and braking cha-
racteristics, may change due to greater crosswind sensitivity, especially when they are fully laden.
Beware of strong winds. Due to the changed handling characteristics, approach the permitted maxi-
mum speed of 150 km/h slowly.
Warning
Danger of accidents Never exceed the payload of 10 kg per case.
–
Always use both side cases and distribute the load evenly on both sides, as well as securing them
against slipping.
Info
When using a pressure cleaner, maintain a distance of at least half a meter from the cases. Use a neutral
detergent (water with mild soap).
Mounting the locking cylinder
–
Insert springs
E
.
Info
The kit contains many small parts. It is recommen-
ded that you perform the assembly while seated at
a table.
500637-01
–
Insert tumblers
chambers
500638-01
–
Insert the key and check whether the tumblers with the
number 1 are correct.
Info
The tumblers must close flush with the locking
cylinder.
–
Replace the non-matching tumblers with ones that have
the matching number.
500517-01
Info
It is recommended that you note the numbers of
the matching tumblers so that the subsequent
locking cylinders can be equipped immediately.
9
(included) into chambers
8
(included) with the number 1 into
A C E
, , and .
MOUNTING 5
A C
, , and
9