Pando PVMAV 45-18 Manual De Uso E Instalación página 144

INOXPAN S.L.
3.9. GLASS PLINTH (OPTIONAL)
Only for models:
1
1. Unscrew and remove the four screws (2) that are used to fix the metal ventilation plinth (1)
and the bottom bracket. (Fig. 1)
2. Insert the tabs on the glass fronted plinth section into the top slots of the metal plinth.
Manoeuvre the plinth so that the holes in the inner lip of the glass fronted plinth section are
level with the holes in the metal plinth. Re-fit the screws (2). (Fig. 2)
NOTE: Do not tilt the appliance further than 90° during this process. Allow the appliance to settle
for at least 8 hours before switching on after tilting.
3.10. BORDEAUX BOTTLE HOLDER
Only for models:
The wine cabinet is designed to load either Bordeaux bottles or Burgundy bottles. In order to
keep the bottle stability when loading the Bordeaux bottles, pls follow up below instruction to
install the plastic Bordeaux bottle holders (if they are provided) on the side pilasters. When
loading the Burgundy bottles, pls remove them.
 PBE 182-190CRR
 PBE 89-66CRR
1 2

PBE 182-190CRR
2
1
144
WINE CABINETS
1 3
2