Philips Lumea BRI947/00 Manual De Instrucciones página 28

28
English
Problem
The ready to flash light
blinks orange and all 5
intensity lights blink as well.
The ready to flash light
does not light up white.
The device produces a
strange smell.
The device doesn't flash,
the fan is not switched on
and all 5 intensity lights
blink.
The skin feels more
sensitive than usual during
treatment. I experience
discomfort when I use the
device.
There is no glass filter in my
attachment.
Possible cause
The device needs to be reset. To reset the device take the plug out of
The device is not completely
in contact with your skin.
The light exit window or the
skin tone sensor is dirty.
You have not removed the
hairs on the area to be
treated properly. These hairs
may get burned and can
cause the smell.
The attachment is not
attached properly.
The light intensity setting you
use is too high.
You did not remove the hairs
on the areas to be treated.
The UV filter of the light exit
window is broken.
You treated an area for which
the device is not intended.
This is normal.
Solution
the socket, wait for 30 minutes to let the
device cool down. The device should
function normally again. In case it doesn't
work again, contact the Consumer Care
Center in your country.
Place the device at a 90 degree angle on
the skin so that the integrated safety
system in in contact with your skin.
Clean the light exit window and the skin
tone sensor carefully.
Pretreat your skin before you use Lumea.
Make sure you attach the attachment
completely. If necessary clean the
electronic contacts on the attachment.
Check if you have selected the right light
intensity setting. If necessary, select a
lower setting.
Pretreat your skin before you use Lumea.
If the UV filter is broken, do not use the
device anymore. Contact the Consumer
Care Center in your country, your Philips
dealer or a Philips service center.
Never use the device on the following
areas: inner labia, anus, nipples, areolas,
lips, moles, freckles, tattoos,
piercings. inside the nostrils and ears,
around the eyes and near the eyebrows.
Men must not use it on the face and
neck including all beard growing areas
and whole genital area.
No action required: there is no filter in
the body and armpit attachments. Only
the facial, precision and bikini
attachments have a specialized filter.