Publicidad
Idiomas disponibles
Idiomas disponibles
Preparations for Use
1. Standing time
After the refrigerator is properly installed and well-cleaned, do not switch it on immediately. Make sure to wait more than one
hour before connecting power to the refrigerator to ensure its normal operation.
2. Cleaning
Make sure the accessory parts inside the refrigerator are present and the inside is wiped with a soft cloth.
3. Power on
Connect the refrigerator to the dedicated power supply battery in the RV, then the compressor will start working. After one
hour, open the freezer door, if the compartment internal temperature drops significantly, it indicates the refrigeration system is
working normally.
4. Food storage
After the refrigerator runs for a period of time, the internal temperature will be automatically controlled according to the user's
temperature setting. After the refrigerator is fully cooled, load food inside.
Tips for Installation
Moving the refrigerator
● Location
Do not place your refrigerator close to heat source and avoid exposure to direct sunlight.
● Leveling
Make sure to level your refrigerator using the front leveling feet. If not leveled, the refrigerator door gasket's sealing
performance will be affected or it may even lead to operating failure of your refrigerator.
Note: After the refrigerator is in position, allow the refrigerant to settle.
● Installation
Do not cover or block the vents or grilles of your refrigerator.
- 6 -
CCD-0007756 Rev: 06-05-23
Publicidad
