Publicidad
Idiomas disponibles
Idiomas disponibles
Functions
Press and hold on "Power" button for 5s to activate the control panel.
1. Functions
1.1 Temp. Setting
Fridge temp. control:
~
Cooling-High: 2°C
4°C (35.6°F
~
Cooling-Mid: 5°C
7°C (41°F
~
Cooling-Low: 7°C
10°C (44.6°F
Freezer temp. control:
~
Freezing-High: -20°C
-16°C (-4°F
~
Freezing-Mid: -17°C
-13°C (1.4°F~8.6°F)
Freezing-Low: -14°C~-10°C (6.8°F~14°F)
Note 1: The above temp. control is a guideline based on ideal
ambient conditions of 16°C
factors can alter performance.
Note 2: The normal ambient temperature for this refrigerator is 10°C to 43°C (50°F to 109°F). Between 43°C to 50°C (109°F to 122°F), the refrigerator can be
used, but may have reduced cooling performance.
1.2 Power off
Hold on "Power" button for 5s to turn off the refrigerator for any extended period of non-use.
2. Battery Monitor
"Normal": Normal voltage range: 10.4
"OV ALM": Over voltage alarm: >=14.5V
"UV ALM": Under voltage alarm: <10.4V
The refrigerator has a low-voltage shut-off function intented to protect your RV battery from excessive drain. The
refrigerator will shut off if the voltage drops below 9V. UV alarm will resume normal status when voltage reaches
11.7V.
3. Operational errors indicated by a flashing LED can be found on the right inside of the cabinet according to the
following chart.
LED 1 flashes
LED 2 flashes
LED 3 flashes
LED 4 flashes
LED 7 flashes
LED 8 flashes
LED 5 flashes
LED 1~6 all flash
LED 6 flashes
LED 7~9 all flash
CCD-0007756 Rev: 06-05-23
~
39°F)
~
44.6°F)
~
50°F)
~
3.2°F)
~
~
32°C (60.8°F
89.6°F) several
~14.5V
Ambient temperature sensor failure
Fridge sensor failure
Freezer sensor failure
Frosting sensor failure
Over voltage alarm
Low voltage alarm
Door alarm failure
Communication failure
Fan failure
Power failure
LED 1 Cooling - High
LED 2 Cooling - Mid
LED 3 Cooling - Low
LED 4 Freezer - High
LED 4 Freezer - Mid
LED 4 Freezer - Low
LED 7 ALM Over voltage
LED 8 ALM Under voltage
LED 9 Power off
Sensor failure. LED keeps flashing until it is repaired.
Sensor failure. LED keeps flashing until it is repaired.
Sensor failure. LED keeps flashing until it is repaired.
Sensor failure. LED keeps flashing until it is repaired.
Power voltage is higher than 14.5V
Power voltage is lower than 10.4V
The fridge door is not closed well. Check and fix it.
The appliance has internal communication failure.
Please call service as soon as possible.
Power voltage is over 17V.
- 7 -
Fridge temp. control
Freezer temp. control
Power
Publicidad
