Simpson IR61094 Manual De Instrucciones página 16

coDE
25 Oil seals worn.
26 Loose drain plug.
27 Worn drain plug o-ring
28 Worn oil fill plug o-ring.
29 Pump overfilled.
30 Incorrect oil used.
31 Oil vent plug is clogged.
PossIBLE causE PossIBLE soLutIon
Have replaced by authorized service center
Tighten.
Check and replace.
Check and replace.
Check for correct amount.
Drain and fill with correct amount and type of oil.
Clean vent plug; blow air through it to remove any blockage. If
prob lem per sists, replace plug.
16