BWT Mini 15 Manual De Instrucciones página 19

REGULATION (ELECTRONIC CONTROLLER)
LED Display:
Screen instructions:
• "OFF" will show in screen if unit is OFF.
• Water inlet temperature will show in screen if unit is ON.
• Error code will show in system is abnormal.
• LED 1: If cooling, LED 1 will be green, and if defrosting, LED 1 will blink.
• LED 2: If heating, LED 2 will be red.
Buttons:
Button
ON/ OFF
Function
+
Up and down
+
Reset
+
Lock and unlock
Error Code:
Protection/error
Ambient temp. too high/too low error
Water in temp. sensor error
Ambient temp. sensor error
Discharge temp. too high error
Discharge temp. sensor error
Coil sensor error
Low pressure error
Water flow error
Definition
• In the main page, long press for 3 seconds to on/off the unit
• In parameter page, press this button to go back to main page
• Long press for 3 seconds to select cooling/heating
• Press to check the parameters
• In main page, these buttons can change the setting temperature
• To validate the setting temperature press
• Under the Off condition, press for 5S to reset all parameters to default.
• In main page, press for 3s to lock/unlock the screen.
- 19 -
Code
E00
E01
E02
E03
E04
E05
EL
E06