Publicidad
Idiomas disponibles
Idiomas disponibles
Trouble or fault
The battery does
not engage with an
audible click.
The battery runs
down more quickly
than usual.
Running speed sud-
denly drops consid-
erably.
The power tool or
the battery becomes
very warm.
The control switch
can't be pressed, i.e.
the switch is locked.
10
Disposal
WARNING
Risk of injury due to incorrect disposal! Health hazards due to escaping
gases or liquids.
▶ DO NOT send batteries through the mail!
▶ Cover the terminals with a non-conductive material (such as electrical
tape) to prevent short circuiting.
▶ Dispose of your battery out of the reach of children.
▶ Dispose of the battery at your Hilti Store, or consult your local gov-
ernmental garbage disposal or public health and safety resources for
disposal instructions.
Most of the materials from which Hilti products are manufactured can
be recycled. The materials must be correctly separated before they can
be recycled. In many countries, your old tools, machines or appliances
can be returned to Hilti for recycling. Ask Hilti Service or your Hilti sales
representative for further information.
14
English
Possible cause
The retaining lugs on the
battery are dirty.
Very low ambient tem-
perature.
Battery is discharged.
Electrical fault.
The tool is overloaded
(application limits ex-
ceeded).
The forward/reverse
switch is in the middle
position.
Action to be taken
▶ Clean the retaining
lugs and engage the
battery in the working
position.
▶ Allow the battery to
warm up slowly to
room temperature.
▶ Charge the battery.
→ page 10
▶ Switch the power
tool off immediately,
remove the battery,
keep it under obser-
vation, allow it to cool
down and contact
Hilti Service.
▶ Select a suitable
power tool for the
application.
▶ Set
the
forward/reverse
switch to the desired
position. → page 11
2384753
*2384753*
Publicidad
