Descargar Imprimir esta página

Joycare JC-354 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 9
DESCRIPTION OF THE APPLIANCE AND USE
POWER button: to turn the product on and off
HEAT button: to activate and deactivate the heat function
VIBRATE button: to activate and deactivate the VIBRATION massage and to select the 3 different intensities (high-medium-low)
KNEADING button: to activate and deactivate the SHIATSU massage
FULL BACK button (full back massage)
UPPER BACK button (upper back massage)
LOWER BACK button (lower back massage)
HOW TO USE THE PRODUCT
Place the massage seat on a chair, sofa or similar and fix it to the back using the appropriate elastic band. Insert the connector in the electrical adapter and
then insert the plug in the electric socket. The product can also be used in the car thanks to the included car adapter
Push the POWER button to turn the product on. Select the settings in the following way:
Press the KNEADING button to activate the shiatsu massage and select the FULL BACK, UPPER BACK and LOWER buttons depending on the area to be
massaged.
Press the HEAT button to activate or deactivate the heat function.
Vibratine massage: Push the VIBRATE button to activate the massage. This starts a continuous intermittent massage on the seat. The massage starti with
a high intensity. Press the button again to go to a medium or low intensity or to deactivate the function. The LED lights corresponding to the different
intensities turn on (H= high; M= medium; L= low).
Push the POWER button to turn the product off, the red LED light flashes to indicate that the massage mechanism is returning to the initial position before
being turned off. Remove the power plug from the socket
Warning: For safety reasons, the product automatically turns off after it has been used for 15 minutes. This procedure does not replace the product's manual
switch off procedure. Always turn the product off when it is not being used and remove the plug from the socket.
MAINTENANCE AND STORAGE
Always detach the power cord before proceeding with cleaning the unit. Do not use any type of solvent to clean the appliance. Clean with a soft, slightly
dampened cloth, and never use detergents. Never immerse the appliance in water or any other liquid. Never use chemical detergents. Always store the
unit in a dry, well ventilated location, away from heat sources, direct sunlight, or sharp objects. Never coil the power cord around the appliance, and do not
use the power cord to hang up the unit.
TECHNICAL CHARACTERISTICS
Description: Shiatsu massage seat with heat function
Automatic switch off after 15 minutes of use
Wattage: 24W
Power supply: DC 12V/2A input
Class II appliance
Do not use this appliance in the vicinity of a bathtub, shower, washbasin or other recipients containing water.
These devices conform to all applicable European directives.
DISPOSAL
At the end of its life cycle, the device (including its removable parts and accessories) must not be disposed of together with household waste, but
in compliance with European Directive 2002/96/EC. Since it must be handled separately from household waste, either bring it to a recycling and
waste disposal centre for electrical and electronic appliances or give it back to the retailer on purchasing a new equivalent unit. Any infringement
will be severely prosecuted.
Specifications and designs are based on the latest information available at the time of printing, and are subject to change without notice.
- protective cover
- pillow
- 4 massaging heads
- Fixing straps
- connector
- electrical adapter
- car adapter
4

Publicidad

loading