Publicidad
Idiomas disponibles
Idiomas disponibles
Service
Preventive maintenance performed by
un au thorized personnel may result in
misplacing of internal wires and
components which could cause serious
hazard. We recom mend that all tool
service be performed by a Dremel
Service
Center.
Disconnect tool and/or charger from
power source before servicing.
Batteries
Be alert for battery packs that are
nearing their end of life. If you notice
decreased
significantly shorter running time
between charges then it is time to
with adequate size conductors that is
capable of carrying the current
necessary for your tool must be used.
This will prevent excessive voltage drop,
loss of power or overheating. Grounded
tools must use 3-wire extension cords
that have 3-prong plugs and receptacles.
NOTE: The smaller the gauge number,
the heav i er the cord.
To avoid accidents, always disconnect the tool and/or charger from
the power supply before cleaning.
NO USER SERVICE -
ABLE PARTS INSIDE.
SERVICE MEN:
tool
performance
Extension Cords
If an extension cord
is necessary, a cord
Maintenance
replace the battery pack. Failure to do
so can cause the tool to operate
improperly or damage the charger.
Cleaning
damage plastic parts. Some of these
are: gasoline, car bon tetrachloride,
chlorinated cleaning solvents, ammonia
and household detergents that contain
ammonia.
Ventilation openings and switch levers
must be kept clean and free of foreign
matter. Do not attempt to clean by
inserting pointed objects through
opening.
or
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
Tool's
Ampere
Rating
3-6
6-8
8-10
10-12
12-16
-13-
Certain
agents and solvents
Cord Size in A.W.G.
Cord Length in Feet
25
50
100
150
18
16
16
14
0.75
18
16
14
12
0.75
18
16
14
12
0.75
16
16
14
12
14
12
–
–
cleaning
2
Wire Sizes in mm
Cord Length in Meters
15
30
60
120
0.75
1.5
2.5
1.0
2.5
4.0
1.0
2.5
4.0
1.0
2.5
4.0
–
–
–
–
–
Publicidad
