Technical Data - Orbegozo SP 6000 Manual De Instrucciones

SP 6000

TECHNICAL DATA

Type Specification Voltage Frequency Power
SP 6000 Remote Control 220-240V 50 Hz 1000W/2000W
INSTALLATION ON THE WALL
Drill two holes in wall and have a distance of 1.8m from the ground. The diameter of the hole just contained
the inflated plastic pipe. Introduce inflated plastic pipe into the holes and screw supplied screws letting
them stick out a little. Hang the appliance on the screws.
FUNCTION OPERATION (CONTROL PANEL AND REMOTE CONTROL)
CONTROL PANEL REMOTE CONTROL
Control panel operation
1. Plug in and switch on by pressing the red switch 0/I, enter into standby mode and display shows "S".
15