PORT CONNECT 902005 Manual Del Usuario página 5

3- CONNECTION TO COMPUTER
1. Position your conference camera:
a. Clamp fixation
The conference camera clamp allows you to fix and adjust it freely on your monitor.
• Grasp the camera as shown in the below illustration and open the clip with your other hand.
• Mount the camera, making sure the base of the clamp is touching the back of your monitor.
b.Tripod fixation
The conference camera has a screw thread on the bottom of the stand for an additional tripod
(not included).
• Screw it to the tripod as shown in the schema below:
• Place and adjust the camera freely in the conference room.
4K CONFERENCE CAMERA WITH AUTO FRAMING
5
2. Connect your conference camera to a power outlet.
3. Connect your conference camera to your computer:
Connect your camera to the USB interface of the PC via USB-C cable. Wait about 1 minute, the
camera will install automatically.
NOTE
If your computer (laptop) is equipped with a built-in camera, you need to change the default
settings of the camera. For example, change the default camera in the chat software settings
or disable the built-in camera in the computer settings.
4. Getting start with video chatting:
To enjoy video calls, you and the person you are calling must install a video calling application
such as Skype TM , Yahoo! ® , @Messenger, Windows Live
In addition to the USB camera and the video calling application, the call recipent need ;
• A computer, a speaker and a microphone (the conference cam is already equipped with
built-in microphones & speaker);
• A high-speed internet connection (e.g. DSL, T1 or cable);
• Please consult the conditions of use for your video calling application (requirements may vary
from application to application, but in general, a minimum upload speed of 2 Mbps is required).
EN - ENGLISH
TM , Gmail TM