Keeper PERFORMANCE ENGINEERED KU6.0 Manual Del Propietário página 5

Winch Installation
Correct installation of your Winch is required for proper operation. Installation should be on a flat surface
following the bolt pattern shown in FIGURE 1.
Read and follow directions carefully to ensure proper Winch alignment and trouble free operation.
This Winch MUST be mounted with the wire rope in the under-wind direction (FIGURE 8).
MUST use only genuine Keeper Winch replacement Wire Rope.
! !
WARNING
Improper mounting could damage your Winch
and void your warranty.
! !
WARNING
DO NOT EXCEED THE RATING OF YOUR RECIEVER HITCH
Step 1 Mount the Winch to the mounting kit base plate,
proper mounting bolts are supplied. If using the
Roller Fair Lead included, install now to mounting
plate. You may need to remove one or more of the
rollers on the roller fairlead to pass through the wire
rope. After doing this you may now attach the clevis
hook. See
(Figure 10) for order and bolt direction.
5
Mounting Plate
4-Way
Roller Fairlead
THIS PRODUCT IS NOT INTENDED FOR LIFTING / HOISTING
FIGURE 10
Wire Rope
Under-wind
Direction
*INCLUDES MOUNTING PLATE