Storing the device
1. Store the suction pipe, suction hose
and mains cable as shown in the il-
lustration.
Illustration I
2. Store the device in a dry room and
secure it against unauthorised use.
Transport
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transportation.
1. Remove the suction hose with floor
nozzle from the support. Carry the
device by the carrying handle and
suction pipe.
2. When transporting the device in ve-
hicles, secure it to prevent it from
slipping or overturning in accord-
ance with the respective valid guide-
lines.
Storage
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during storage.
The device may only be operated in-
doors.
Care and service
DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
Changing the cartridge filter
1. Unlock and remove the suction
head.
2. Turn the suction head by 180 ° and
set it down.
3. Unscrew the securing nut.
4. Remove the cartridge filter.
5. Install new cartridge filter.
6. Insert and tighten the securing nut.
7. Fit and lock the suction head.
Changing the fleece filter bag
1. Unlock and remove the suction
head.
2. Pull the fleece filter bag on the
flange up and out.
Illustration E
3. Fold in the lock latch and seal the
fleece filter bag tight.
4. Fit the new fleece filter bag.
5. Fit and lock the suction head.
Troubleshooting guide
DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
Suction turbine does not start up
1. Check the socket and the power
supply fuse.
2. Check the mains cable, mains plug,
and (if necessary) the socket on the
device.
3. Switch on the device.
Suction turbine runs, but the device
does not suck
Float closes suction duct
1. Empty the dirt receptacle.
English
11