Holmatro HCT 5117 RH Manual página 27

2.7 Safety regulations with respect to maintenance
• Wear personal means of protection when performing maintenance tasks.
• Never work in a way that could jeopardize safety.
• Make sure that the equipment cannot roll away or tip over. The control and drive must be switched
off and safeguarded against unexpected activation.
• Make sure that moving parts do not move unexpectedly.
• Used or leaked fluids, and any other products consumed during the activities, must be collected and
disposed of in an environmentally responsible way.
3 Description
3.1 Equipment
The HCT can be used independently because of the hand-operated hydraulic system. The combitool is
produced as a hand tool that can be operated by one person. The equipment is suitable for cutting,
spreading and squeezing constructional elements of vehicles during rescue operations. The equipment
can squeeze material tightly or squash it and thus create weak pivots or places that are easier to cut.
The equipment can also push parts apart.
3.1.1 Type designation
Example: HCT 5111 ST
/i
Digit Example
1-3 HCT
4-5 51
6-7 11
8-9 ST
3.2 Product identification (Fig. 2)
/i
1 Pump handle
2 Carrying handle
3 Pump handle locking ring
4 Pump rod holder
5 Carrying handle locking bar
6 Carrying handle locking knob
7 Filler caps
8 Pump handle adjustment knob
9 Control ring
10 Protection hood
11 Cap screw
HCT 51** (RH)(ST)
All manuals and user guides at all-guides.com
Description
HCT=Hand-operated Combi Tool
Model number
11=11" opening
17=17" opening
ST=Special Tactics
RH=Rotating Handle
916.001.556_001
12 Cover
13 Inner locking ring
14 Outer locking ring
15 Centre nut
16 Centre bolt
17 Hinge pins
18 Snap rings
19 Blades
20 Blade cutting edge
21 Spreading tips
22 Sealing plug
EN
27