Adjusting The Differential Feed; Gathering - JUKI MO-1200QVP Manual De Instrucciones

Adjustments and settings
A B
C D

Adjusting the differential feed

The differential feed can be adjusted by simply turning the differential
feed adjustment dial in the direction desired. Always make a trial run.
The differential feed is infinitely variable and can be adjusted while
sewing.
Effect
Wave-free seams
2
(A)
Wave-free seams
1.5
(B)
N Normal feed (C)
0.7 No puckering (D)

Gathering

Using the differential feed a single layer of fabric can be gathered be-
fore sewing it to a garment.
For example, sleeve heads and lower edges, yokes, lace edging or
frills.
Adjustment:
• Stitch - 4 thread overlock
• Differential feed – 2
• Stitch length - 3-4
• Cutting width - 2-3
Increase the needle thread tension (6-8) for a tighter gather.
Note:
When sewing without differential feed, turn the adjustment knob to "N".
Fabric
Thick wool knits, hand knitted articles,
very stretchy fabrics
Cotton silk, synthetic jersey, sweatshirt
fabrics and fine knits
Woven fabrics
Fine nylon jersey, closely woven fabrics,
lining fabric, satin, poplin
21