FONESTAR ZSC-1110 Manual De Usuario página 2

EN
DESCRIPTION
- Switching and control of 10 loudspeaker zones, expandable to 300 zones.
- Possibility of paging using the microphone with zone selector ZS-11. Up to 16 microphones can be
connected with zone selector ZS-11.
- 2 100 V line inputs for each zone, to connect the background music and paging amplifiers, general
purpose inputs and outputs for connection to the alarm centre, line inputs and microphone inputs.
CONTROLS AND FUNCTIONS
FRONT PANEL
MIC 1
1
1.- MIC 1: unbalanced microphone input, 6.3 mm jack connector 600 Ω.
2.- CHIME: button to activate chimes.
3.- MIC 1/2 VOL: MIC 1/MIC 2 microphone input volume controls.
4.- PAGING ZONES: controls to activate/deactivate the background music or paging in the output zones.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: SHOCK HAZARD - DO NOT OPEN
The green LED indicator means that the music is activated in the corresponding zone, the red LED
RISK OF FIRE-REPLACE FUSE AS MARKED
~230 V AC. 50/60 Hz, FUSE: T1AL 250 V
POWER CONSUMPTION: 40 W
indicator means that paging is activated in the corresponding zone and the orange LED indicator means
that both the background music and paging are activated.
5.- Amplifier on/off switch.
6.- POWER: LED power indicator..
1
7.- MUSIC PAGING: activates the background music or paging selection mode. The green LED indicator
means that by pressing the zone activation controls the background music will be activated. The red
LED indicator means that by pressing the zone activation controls, paging will be activated.
8.- ALL ZONES: activates or deactivates all the output zones.
A B C
7
GREEN: MUSIC
ZONE SYSTEM ZSC-1110 RED: PAGING
1
MIC 1 VOL MIC 2 VOL
CHIME
2 3
8
ALL
ZONES
2 3 4 5 6
4
DEVICE ID
2
3
- 2 -
POWER
7 8 9 10
ZONES
5
11
ZSC-1110
ZONE SYSTEM
CHIME BASS TREBLE
COM
VOL
AUDIO
ALARM
OUT
4 5 6 7 8
6
12
MIC 2
9 10