Publicidad
Idiomas disponibles
Idiomas disponibles
Inserting a disc
1. Open the CD door by opening the CD door open area.
2. Insert a disc on the disc tray with the label side facing up.
3. Close the CD door.
Playing a disc
1. Press
to turn the unit on.
• The standby indicator light will go out.
2. Repeatedly press S to switch the unit to the CD mode.
• The player will scan the contents of the CD. The total number of tracks will then be
displayed.
3. The player will automatically start playback from the first track.
4. Adjust the volume by repeatedly pressing or pressing&holding
5. To pause playback press
• The current playing time will flash on the display.
6. To resume playback, press
7. To stop playback, press
NOTE: The CD door should only be opened when the CD is in stop mode.
USB Operation
Inserting and removing a USB memory device
Carefully insert a USB memory device into the USB port. To remove the USB memory device
simply pull the device out.
Selecting USB mode
1. To select USB mode, repeatedly press S to select the USB mode.
• The display will show the total number of folders then the total number of tracks.
• The player will automatically start playback.
2. To pause playback press
3. To stop playback, press
NOTE: The USB memory device should not be removed during playback as damage or
corruption of files may occur.
Selecting a Track (CD/MP3/USB)
During playback, press
NOTE:
• Press
once to go to the beginning of current track. Press
• You can also skip to a desired track when the player is in stop mode. Press
selected track.
• If the disc or USB has more than 10 track, you can skip ahead by 10 tracks by pressing
FLD/10 , if you press the button twice, the disc or USB will move forward by 20 tracks. You
can reach the last track of the disc or USB using this button.
.
again.
.
. To resume playback, press
.
/
to select the desired track.
EN-6
.
/
again.
twice to go to previous track.
to play the
Publicidad
