Descargar Imprimir esta página

Brandt BCD330USB Manual De Instrucciones página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

AUX IN
Connect an audio cable (not supplied) to the AUX IN jack on the rear of the unit. Connect the
other end to a suitable output socket on your auxiliary device.
In power on state, repeatedly press S to switch the unit to the
You can play music from an auxiliary device through the speakers of the player.
TROUBLESHOOTING
Problem
The player will not
play discs.
CD skips while
playing.
Radio sound
distorted.
No radio sound.
The USB memory
device will not play.
SPECIFICATIONS
Power Supply
Output Power
Radio Frequency Coverage
We apologise for any inconvenience caused by minor inconsistencies in these instructions,
which may occur as a result of product improvement and development.
Possible Cause
1. Unit not in CD mode.
2. The disc is not installed or
installed incorrectly.
Disc is dirty or scratched.
1. The station is not tuned in.
2. There is interference.
1. The unit is not in radio mode.
2. The volume is on the
minimum setting.
1. The unit is not in USB mode.
2. The USB memory device is
not inserted correctly.
DC
9.0V, 1.0A Max. (AC adapter)
DC
9.0V (UM-2 1.5V x 6 batteries)
USB: 5.0V
2 x 1.2W
FM 87.5 – 108 MHz
AUX
1. Select CD mode.
2. Load a disc with label side up.
Wipe the disc with a cloth or use
another disc.
1. Fine tune the station.
2. Reposition the unit.
1. Select radio mode.
2. Adjust the volume level.
1. Select USB mode.
2. Re-insert the USB memory device.
, 500mA Max.
Darty Plc © UK: EC1N 6TE 18 / 03 / 2014
EN-8
mode.
Possible Solution

Publicidad

loading