Bosch EasyHedgeCut 12-35 Manual Original página 15

OBJ_BUCH-1685-008.book Page 15 Tuesday, May 23, 2017 2:11 PM
ings. The heating of the battery charger during the charg-
ing process can pose a fire hazard.
 Do not cover the ventilation slots of the battery charg-
er. Otherwise, the battery charger can overheat and no
longer operate properly.
 Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.
Maintenance
 Remove battery before adjusting or cleaning, and be-
fore leaving the machine unattended for any period.Al-
ways wear gardening gloves when handling or working
near the sharp blades.
 Examine the machine and replace worn or damaged parts
for safety.
 Always lubricate the cutting blade with protective spray
before storage.
 Keep all nuts, bolts and screws tight to be sure that the ma-
chine is in safe working condition.
 Ensure replacement parts fitted are Bosch-approved.
 Always lubricate the cutting blade with protective
spray before use.
Technical Data
Cordless hedge trimmer
Article number
No-load stroke rate
Cutting length
Tooth opening
Weight according to EPTA-Procedure 01:2014
Serial number
Battery
Article number
Rated voltage
Capacity
Number of battery cells
Bosch Power Tools
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
Wear protective gloves
Wear eye protection.
Movement direction
Switching On
Switching Off
Permitted action
Prohibited action
Accessories
Intended Use
The machine is intended for cutting and trimming hedges and
bushes in domestic use.
EasyHedgeCut 12-35
EasyHedgeCut 12-350
EasyHedgeCut 12-351
3 600 H49 B..
-1
min 2400
mm 350
mm 15
kg 1.9
See serial number (type plate) on the machine
Li-Ion
1 607 A35 05E
V 12
Ah 1.5
3
English | 15
EasyHedgeCut 12-45
EasyHedgeCut 12-450
3 600 H49 A..
2400
450
15
2.0
Li-Ion
1 607 A35 05E
12
1.5
3
F 016 L81 736 | (23.5.17)