Kamikaze KV 500 Manual De Uso página 74

ELECTRICAL PRUNING SHEAR
15.3 MOVING BLADE REPLACEMENT
• Use only original blades, refer to customer assistance service to buy
blades and original spare parts.
• With the tool connected to the battery, open the blades by pressing the
trigger(1), then switch off the battery and remove the cable (2):
• Remover the trigger protection by unscrewing the fixing screw (3), disengage
the protection from the rear side first (4) and from the front side then (5):
• Remove the circlip (6) and the pin (7) from the moving blade actuator rod:
74
www.kamikazevolpi.com