Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before assembling the product, make sure all parts are included. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged,
do not attempt to assemble the product.
Estimated Assembly Time: 10-15 minutes.
Tools required for assembly and installation (not included):
9/16" (14 mm) Wrench
Phillips Screwdriver
Sealant Tape
Drill & 3/8" Drill Bit
Pencil
Level
ASSEMBLY INSTRUCTIONS
1. Pull the quick release pin (I) out and turn
it 90 degrees to unlock the wall mounting
bracket (D). Tap down on the wall mounting
bracket to remove from the manual hose
reel (A).
2. Pick where you would like to hang the
manual hose reel. Take and place the wall
mounting bracket (D) against the wall and
using a pencil mark the four holes in the
bracket. See fig 1.
3. Using a 3/8" drill bit, drill the 4 holes you
marked with the pencil. See fig 2.
NOTE:
If drilling directly into wood then there is
no need to use the plastic anchors.
If drilling into dry wall or cement you will
need to insert the plastic anchors into the
holes.
1
1
I
I
2
2
2.1
3.1
5
D
D
D
D
Publicidad
