Publicidad
Idiomas disponibles
Idiomas disponibles
3.5.
Cleaning and maintenance
a)
Unplug the mains plug and allow the device to cool completely before each cleaning, adjustment or replacement of
accessories, or if the device is not being used.
Wait for the rotating elements to stop.
•
b)
Always unplug the device before cleaning or putting it away.
c)
Use only non-corrosive cleaners to clean the surface.
d)
Use only mild, food-safe detergents to wash the device.
e)
After cleaning the device, all parts should be dried completely before using it again.
f)
Store the unit in a dry, cool place, free from moisture and direct exposure to sunlight.
g)
Do not spray the device with a water jet or submerge it in water.
h)
The device must be regularly inspected to check its technical efficiency and spot any damage.
i)
Use a soft, damp cloth for cleaning.
j)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal spatula) because they may damage the
surface material of the appliance.
k)
Do not clean the device with an acidic substance, agents of medical purposes, thinners, fuel, oils or other chemical
substances because it may damage the device.
DISPOSING OF USED DEVICES:
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device recycling and
collection point. Check the symbol on the product, instruction manual and packaging. The plastics used to construct the
device can be recycled in accordance with their markings. By choosing to recycle you are making a significant contribution to
the protection of our environment.
Contact local authorities for information on your local recycling facility.
1, 2 - Safety switches
3 - Speed control knob
4 - ON/OFF switch
5 - Emergency Safety Switch
Publicidad
