Palmer PWT12IEC Manual De Usuario página 10

USER MANUAL
CAUTION! Material damage due to reverse polarity!
Make sure that the polarity of the DC voltage input of the corresponding effect unit corresponds with
matches the polarity of the DC voltage outputs of the power supply unit (positive pole outside, negative
pole inside). An effect unit with a DC input of reversed polarity can cause a malfunction when connected
to the damage to this power supply unit.
CAUTION! Property damage due to overvoltage!
Make sure that the output voltage of the power supply corresponds to the voltage required by the
effect unit Input voltage corresponds. An effect unit can be damaged by overvoltage.
CAUTION! Material damage due to DC voltage at the AC voltage input!
Do not connect any effect device that is intended for an AC voltage as power supply, to this power supply
unit. In individual cases, this could damage the effect unit and / or the power supply unit.
MOUNTING
The housing of the power supply unit has mounting holes in the base plate and the side panels (fig. A) so that
the power supply unit can be securely fastened to a pedalboard (e.g. with cable ties).
A
A
EN
A
A
10