NOTICE!
Risk of damage!
Improper handling of the product may result in damage to the
product.
− Always place the product on a firm and level surface.
All table feet should be in contact with the ground at all
times. Ensure the correct stability has been achieved
before using the product.
− Do not place the product near or against any open flames,
heaters, furnaces or other hot objects. Keep it away from
fire.
− Check regularly the stability of all connections and
retighten the screws. Do not overtighten the screws as this
will add unnecessary stress on the frame.
− Stop using the product if its plastic parts exhibit cracks or
breaks or are deformed. Only replace damaged parts with
corresponding original spare parts.
− Make sure that the product is stable and inspect the
product before each use. The safety of the product can
only be ensured if it has been properly assembled and all
connections have been made securely.
− Never attempt to clean the product by immersing it
in water and do not use a steam cleaner to clean it.
Otherwise, you could damage the product.
Safety
9