Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
2. To unlock, release the lever (19),
it will return to the initial position.
3. Check that the sawblade is se-
cure by pulling on it.
Removing the sawblade:
4. Press the lever (19) for sawblade
unlocking upwards as far as the
stop and then pull the sawblade
out of the sawblade mounting.
For certain work, the sawblade
can also be inserted after turning
through 180°.
Operating the sabre saw
1. Before switching the appliance on,
ensure it is not in contact with the work-
piece.
2. Turn the appliance on.
By using the on/off switch (
can progressively control the stroke
rate.
Gentle pressure: low stroke rate.
Greater pressure: higher stroke rate.
The on/off switch cannot be locked.
3. Place the footplate (
piece.
4. Cut with a uniform forward motion.
5. After completion of the work, first re-
move the blade from the saw cut and
then switch the appliance off.
Motor unit with multifunction
tool PKGA4
Changing the tool
Secure the appliance against
switching on (see "Switch-
ing on/off"). If the appliance
is switched on accidentally,
there is a danger of injury.
Attaching/removing sanding sheet
The delta sanding plate (30) is fitted with Vel-
cro for rapid attachment of the sanding sheet.
11) you
18) on the work-
Practical tips
1. Push the lever (27) for tool unlock-
ing upwards as far as the stop.
2. Pull the unlocked tool holder (29)
off forwards.
3. Place the required tool
(30/32/33) on the arbor (28).
12 different positions are possible.
4. Press the tool holder (29) back
into the central mounting.
5. Push the lever (27) for tool un-
locking forwards again. The tool
holder is fixed to the tool.
Attaching sanding sheet
1. Press the sanding sheet (31) even-
ly onto the delta sanding plate
(30). Ensure that the holes in the
sanding sheet are placed above
the openings in the sanding plate.
Removing sanding sheet
2. Simply pull the sanding sheet (31)
off the delta sanding plate (30).
When working with the ap-
pliance, always wear suitable
clothing and appropriate pro-
tective equipment.
Prior to each use it must be
ensured that the appliance is
working correctly.
Personal protective equipment
and a fully functional appli-
ance reduce the risk of inju-
ries and accidents.
Wear ear protection.
GB
IE
3 9
Publicidad
