Publicidad
Idiomas disponibles
Idiomas disponibles
GB
IE
Sawing
Wear eye protection.
•
Use only undamaged sawblades in
perfect condition. Only use metal saw-
blades for metalworking.
•
Ensure your stance is stable and hold
the appliance tightly with both hands
and away from your body.
•
Before sawing the workpiece, check
for hidden foreign objects such as
nails, screws. These must be removed.
•
Plunge cuts may only be made in soft
material such as wood or plaster-
board.
Selection of sawblade
for wood, plastic, plaster-
Wood sawblade
board
for metal sheets, profiles
Metal sawblade
and tubes
for soft materials like
Plunge sawblade
wood or plasterboard
Sanding
•
Use a dust extraction system when sand-
ing with the multi-sander attachment.
•
Move the appliance against the work-
piece once it is switched on.
•
Clean the sanding plate before you at-
tach a sanding sheet.
•
Only work with sanding sheets in per-
fect condition to achieve good sanding
results.
•
Work using low and even pressure.
This protects the appliance and the
sanding sheet.
•
Do not use the same sanding sheet to
sand different materials (e.g. metal
and then wood).
4 0
All manuals and user guides at all-guides.com
Selection of sanding sheet
Grain size P Application
for pre-sanding rough wood
60
surfaces
80 / 120
for plain sanding
for fine sanding of primed and
240
painted surfaces
Scraping
•
Use a high oscillation rate when scrap-
ing.
•
Work using low pressure and at a low
angle in order not to damage the sub-
strate material.
Cleaning/Maintenance
Repair and servicing work not
described in this manual should
always be carried by our Service
Centre. Use only original parts.
Switch off the device and remove
the battery from the device before
working with or transporting it.
The following cleaning and servicing
should be done regularly. This will ensure a
long and reliable service life.
Publicidad
