HoMedics LUXURY FM-90-EU Manual De Instrucciones página 2

PRODUCT FEATURES:
POWER BUTTON
MAX FILL LINE
BUBBLE SPA: ENJOY A SOOTHING AND
REJUVENATING BUBBLE MASSAGE
INSTRUCTIONS FOR USE:
1. Ensure that the unit is unplugged before filling with water. Fill with warm water to the MAX fill line located on the inside of the tub.
2. Place the unit on the floor in front of a chair. It is recommended to place the product on a towel.
3. Plug the unit into a 220-240 AC power supply.
4. Sit down and place your feet in the water. Do not stand in the unit.
5. To turn the unit on, press the power button
6. To select the temperature, press the temperature control button
Note: For best results always start with warm water in the footspa.
7. Select your desired program by pressing the program button
Roller - x 1 / Heat - x 2 / Bubbles -
8. To turn the footspa off, press the power button again.
9. To empty: First, unplug the unit. Tip the unit, allowing water to pour out of the corner furthest from the control panel.
DO NOT pour water over the control panel.
MAINTENANCE:
Cleaning
• Unplug the appliance and allow to cool before cleaning. Clean only with a soft, slightly damp sponge.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, glass / furniture polish, paint thinner etc to clean.
• Periodically straighten cord if it becomes twisted.
Storage
Place the appliance in its box or in a safe, dry, cool place.
DO NOT wrap the power cord around the appliance.
DO NOT hang the unit by the cord.
TEMPERATURE CONTROL BUTTON
. The roller, heat and bubble function will start automatically.
. Keep pressing to reach the desired temperature (between 35º to 42º degrees).
as follows:
x 3 / Roller + Heat - x 4 / Heat + Bubbles -
2
TEMPERATURE (ºC)
x 5 / Roller + Heat + Bubbles -
I
GB
PROGRAM BUTTON
MASSAGE ROLLERS X 2:
ROLL BENEATH YOUR FEET FOR
A DEEP PENETRATING FOOT
MASSAGE
x 6