Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Button
Mode
Bluetooth/SD card/USB
AUX IN/FM
All modes
Bluetooth/SD card/USB
SD card/USB
FM
All modes
Bluetooth/SD card/USB
SD card/USB
FM
All modes
NOTE: In AUX IN mode, use the external device's controls for music playback.
FM Radio
The radio has a built-in antenna.
•
Press the M button to select the FM radio mode. A beep will sound.
•
Press and hold the M button to start an auto scan and save FM radio stations.
NOTE: If the speaker cannot find any radio stations, try moving it to a different
location where it can receive a better FM radio signal.
LED Light
•
Simultaneously press and hold the
The blue light will gently fade in and out.
Connecting two speakers (TWS)
Two EDENWOOD LEASH speakers can be connected to an external audio device. The LED
light and playback buttons can be used on either speaker to operate them in TWS mode.
1.
Make sure that both speakers are not connected to any other Bluetooth devices.
2.
Place the speakers within 10 metres of one another (without obstructions).
3.
Turn on both speakers. The blue LED lights will flash.
Action
Press to play or pause the track or file.
Press to mute the sound.
Press and hold to decrease the volume.
Press to go back to the previous track or file
Double-press to go to the previous folder.
Press to go to the previous FM radio station.
Press and hold to the increase the volume.
NOTE: A beep will sound when you reach the
highest volume setting.
Press to skip to the next track or file.
Double-press to skip to the next folder.
Press to skip to the next FM radio station
Press to switch between normal, bass and
treble mode.
+
or
+
buttons to turn the LED light on or off.
27
EN
Publicidad
