Publicidad
Idiomas disponibles
Idiomas disponibles
B
D
F
E
D
B
D
B
B
Contact Belle Forêt at (800) 880-8164. Copyright ©2015, World Imports Decorative Plumbing. All rights reserved.
1.
Apply a layer of silicone on the underside of the top (B) along the basin
cutout, where the basin (D) will be in contact.
Lower each basin (D) onto the top (B), lining it up with the cutout.
2.
Wipe away any excess silicone.
3.
Position the brackets (E) so they clamp the basin (D) edge to the top (B).
1.
Thread the screws (F) through the spaces in the brackets (E), then
2.
through the anchor in the top (B).
Tighten the screws with a screwdriver, turning it clockwise.
3.
CAUTION
Do not over tighten the screws as this could crack the basin.
Apply a bead of silicone sealant where the basins (D) meet the top (B).
1.
2.
Use a clean rag to push in the silicone and wipe away any excess.
1.
Wipe off the top edges of the vanity (A) that will be in contact with the
top using a clean rag.
2.
Apply a layer of silicone along all of the top edges.
3.
Align the top (B) with the vanity (A).
Slowly lower the top (B) onto the vanity (A).
4.
A
CAUTION
Two people are needed to safely lift the top and accurately position
it onto the vanity.
PAGE 3
MARIBELLE VANITY COMBO
INSTALLATION INSTRUCTIONS
hts reserved.
Publicidad
