Belle Foret MLLGVT4922 Instrucciones De Instalación página 4

OPTIONAL
C
OPTIONAL
Contact Belle Forêt at (800) 880-8164. Copyright ©2015, World Imports Decorative Plumbing. All rights reserved.
If the floor is uneven, causing the vanity (A) to wobble, determine which
1.
foot needs to be adjusted in height.
Carefully tilt the vanity (A) either backwards or forwards to access the leg
2.
leveler. Turn the leveler clockwise to make the leg shorter, or
counterclockwise to make it longer.
A
Repeat as needed with the other feet until the vanity stands solidly on the
3.
floor.
CAUTION
Two people are needed to safely tilt the vanity and access the leg levelers.
Wipe off the area of the top (B) where the backsplash (C) will sit using
1.
a clean rag.
Apply a line of silicone onto the top (B) along the back edge.
2.
B
Align the backsplash (C) with the back edge. Slowly lower it onto the
3.
top (B) and gently press to adhere.
A
Wipe away any seeping silicone from underneath the backsplash (C)
4.
with a clean rag.
Fully extend the drawer.
1.
Pull the two latches outward on the underside of the drawer to release
2.
the lock.
Simultaneously tilt and lift the drawer upwards to pull it out of the
3.
vanity (A).
PAGE 4
MARIBELLE VANITY COMBO
INSTALLATION INSTRUCTIONS
hts reserved.