Tennant Orbio OS 3 Manual Del Operario página 23

9. Install e−cell onto new manifold. Note port
and connector locations. Be sure the snaps
hold the e−cell and manifold securely
together.
10.Engage e−module into rails on chassis. Press
firmly until fully seated.
11. Reconnect ribbon cable.
12.Rotate the retaining tab clockwise to
re−secure the the e−module.
13.Turn on water.
14.Power machine by plugging into outlet.
15.Check for leaks.
OS3 DM20036 (1−2018)
OPERATION EN
16.Insert blank USB drive into the USB port.
(ORB3000000 − ORB3001577)
NOTE: Do not use the BLUE Orbio USB flash
drive on machines serial number ORB3001578
and above or machines updated to the display
with front USB ports.
(ORB3001578−
17.Wait to complete initialization.
18.Press manifold icon on touchscreen.
(ORB3001578− )
)
21