Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
This product is only suitable for professional use and does not apply to security for other purposes.
This product is designed for indoor use, it is IP20 protection class. Lamps should be kept dry to avoid
moisture, overheating or dusty environment.
Prevent lamps get in contact with water or any other liquid in order to avoid problems as: fire,
overheating, electric shock or lamp explosion, causing serious injuries.
Be sure that when you install the unit in a truss system, all the truss clamps are well close and pressed.
All the structure where the devices are installed must perfectly support all the weight.
Anti-high temperature
Please don't use the equipment if the temperature is above 40℃.
Rupture prevention
The lens should be replaced when they are damaged or present any problem. Replace always with an
original lamp from MARK.
To prevent falling wounding
If the device is going to be transported, please don't move the package by one person only. Please,
verify that the facilities can withstand the weight of the units at least 10 times more. Use always a steel
wire as auxiliary security between the device and the structure.
UA protection and bulb explosion
Do not view the beam directly. Do not use the equipment without the lens. The lens and the light head
covers should be timely replaced if appears any sign of damage or rupture. The device should be used
with the protection screen together.
Prevention of electric shock
The electrical connection must only be carried out by qualified personal. Before installing, be sure to
connect it to an electrical network that works under the same parameters.
The device must be properly grounded, installed in accordance with the relevant standards. Turn off
the power when stalling or replacing the lamp and the fuse. Don't use the device during a lightning
storm or wet environment.
3
Publicidad
