Descargar Imprimir esta página

Montipower MBX PNEUMATIC Manual De Instrucciones página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
Operating instructions
For your safety
Working safely with this machine is possible only when the operating and safety information
are read completely and the instructions contained therein are strictly followed.
Wear safety glasses, protective gloves and sturdy shoes.
The parts rubbed-off while working are detrimental to health. Wear a dust mask!
• When working with the machine, always hold it firmly with both hands and provide for a
secure stance.
• Use only original MBX
• Before carrying out any work on the tool itself, during pauses in the work and when not in use,
disconnect the air supply.
• Do not use combustible gases or oxygen instead of pressurised air.
• When working on metal, flying sparks are produced. Take care that no persons are
endangered. Because of the danger of fire, no combustible materials should be located in the
vicinity (spark flight zone).
• Do not drill into housing or attach rivets in order to mark the machine. The insulation is then
no longer ensured. Use stickers.
• Use only original MBX
Tool Specifications
MBX
Pneumatic
®
Operating pressure
Air consumption (average)
No-load speed
Pressurised air connection
Hose width (min.)
Weight
Usage
MBX
Pneumatic is intended for the removal of undercoating, PVC and other sealing compounds
®
as well as for paint removal from car bodies especially at welding seams resulting from accident
damage. Do not use this product in any other way as stated for normal use.
Equipment protection
The maximum allowable operating pressure of 6.2 bar must not be exceeded. Use an air
pressure regulator, if necessary.
To avoid damage from contaminated air, a maintenance unit must be used in the air supply
system.
4
belts.
®
parts and accessories.
®
6.2 bar (90 psi)
500 l/min
0 – 3500 rpm
R 1/4"
9.5 mm (3/8 ")
1.1 kg
Noise/vibration information
Measured values determined according to
DIN 45635- 21; DIN EN ISO 3744.
Typically the A-weighted noise levels of the
product are: sound pressure level: 83 dB (A);
-1
sound power level: 88 dB (A).
Use ear protection!
The typical weighted acceleration is 1 m/s
MBX
PNEUMATIC
®
.
2

Publicidad

loading

Productos relacionados para Montipower MBX PNEUMATIC