Display Settings - JVC KD-R690S Manual De Instrucciones

DISPLAY SETTINGS

Zone identification for brightness setting
Zone identification for color setting (for KD-R690S)
1
Press and hold .
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
DISPLAY
DIMMER Dim the illumination.
OFF: Dimmer is turned off. Brightness changes to [DAY] setting.
ON: Dimmer is turned on. Brightness changes to [NIGHT] setting.
( [BRIGHTNESS])
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: PM6:00 ; [OFF]: AM6:00)
DIMMER AUTO: Dimmer turns on and off automatically when you turn off
or on the car headlights. *
.
Default: XX
1
BRIGHTNESS Set the brightness for day and night separately.
1 DAY/NIGHT: Select day or night.
2 Select a zone.
3 LEVEL 00 to LEVEL 31: Set the brightness level.
2
TEXT SCROLL * SCROLL ONCE: Scrolls the display information once. ; SCROLL
AUTO: Repeats scrolling at 5-second intervals. ; SCROLL OFF: Cancels.
COLOR (for KD-R690S)
PRESET Select an illumination color for the buttons.
• COLOR 01 to COLOR 49
• USER: The color you have created for [DAY COLOR] or [NIGHT COLOR]
is shown.
• COLOR FLOW01 to COLOR FLOW03: Color changes at different speeds.
DAY COLOR Store your own day and night illumination colors for the buttons.
1 RED/GREEN/BLUE: Select a primary color.
2 00 to 31: Select the level.
Repeat steps 1 and 2 for all the primary colors.
NIGHT COLOR
• Your setting is stored to [USER] in [PRESET].
• [NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your
car's headlight.
MENU COLOR ON: The color of buttons illumination changes to white color when
in menu mode or when selecting a music file from a folder/list. ;
OFF: Cancels.
*
1
The illumination control wire connection is required. ( 24)
*
2
Some characters or symbols will not be shown correctly (or will be blanked).
17
ENGLISH