Segway eScooter E300SE Manual Del Usuario página 14

7. Charge
Charge the vehicle
1
see [ Charging Port] at page 8.
Charge the Battery
2
a. Use the key to open the seat bucket
and pull the foot panel switch to
unlck it.
c. Connect the charging cable to the
charging port on the battery and then
plug into a power socket.
23
b. Open the foot panel, which is also the
battery compartment lid, and take out
the battery.
* The indicator on the battery charger
shows solid red when charging and
turns green when finished.
8. Common Fault and Solutions
Fault Possible causes
Error code 10 Controller communication error
Undervoltage protection of motor
Error code 11
controller
Error code 12 Motor hall sensor fault
Error code 13 Controller MOS tube fault
Error code 14 Throttle abnormality
Error code 15
Brake switch abnormality
Error code 16 Error in saving configuration settings
Error code 17 Dashboard communication error
Lead-acid sampling board
Error code 18
communication error
Error code 19-30 Lithium-ion battery abnormality
Error code 33 Program redirection error
Error code 34 Abnormal vehicle temperature
Dashboard and ECU communication
Error code 35
error
Error code 36 Weak central controller signals
Error code 37 Low battery in central controller
Error code 38 Electric switch error
AHRS (attitude and heading
Error code 40
reference system) error
Error code 41 Stem lock not released
Error code 42 Invalid or wrong ECU certificate
The vehicle was in a crash or violent
Error code 43
impact
Solution
Check the controller, dashboard and
related wiring.
Charge the vehicle before use.
Check the throttle, motor, motor controller
and related wiring.
Check the brake levers, motor controller
and related wiring.
Please contact after-sales service or an
authorized dealer.
Check the LCD wiring inside the dashboard.
Check the lead-acid sampling board and the
related wiring.
Check the instruments, battery and
related wiring.
Update the program.
Check the temperature sensors of the
dashboard.
Check the dashboard, ECU and related wiring.
Make sure the vehicle is parked in an open
space outdoors.
Connect the battery and keep the main
switch on for at least 5 hours.
Check if the electric switch cable is
short-circuited or broken.
Please contact after-sales service or an
authorized dealer.
Turn off the vehicle and power it on again.
Replace ECU.
If this is a false alarm, please check the
dashboard. If there was an accident, turn
off the vehicle and power it on again.
24