Craftsman 12AVP2R3391 Manual Del Operador página 8

g
f
Figure 3
5. Reattach knobs or wing nuts (a) and carriage bolts (b)
removed in STEP 2 into lower holes of the handle or
lock the EZ-fold handle release levers (c) (Figure 4).
b
a
d
Figure 4
IMPORTANT: When locking the EZ-fold handle release
lever (c) ensure the position indicator (h) aligns with one
of three handle positions (i) (Figure 5).
c
Figure 5
ASSEMBLY
e
c
h
i
8
6. Insert the T-bolts (d) removed in STEP 4 through the
handle brackets and lower handle (Figure 4) and
tighten securely to secure the handle in place.
FOLDING HANDLE
1. Remove knobs or wing nuts (a) and carriage bolts (b)
from the handle or if equipped with the EZ-lock handle
(c), proceed to STEP 2 (Figure 6).
NOTE: The EZ-Fold handle release levers are shipped in the
unlocked position.
Do not loosen or remove hex head screws.
a
b
d
Figure 6
2. Remove the T-bolts (d) from the handle brackets
(Figure 6).
3. While stabilizing mower so it doesn't move, gently lift
and pivot the upper handle into the operating position
(Figure 7). Make certain the lower handle is seated
securely into the handle brackets. Do not crimp blade
or drive control cables while lifting the handle up
Figure 7
c