Silvercrest SMA 500 F1 Instrucciones De Uso página 8

Before replacing any accessories or additional parts that
►
move during operation, the appliance must be switched
off and disconnected from mains power.
Ensure that the appliance is stable and vertical before
►
switching it on. Otherwise, the appliance may tip over and
the hot milk will spill out.
Do not touch the rotating parts during operation!
►
Parts of the appliance get hot during use!
►
Therefore, touch the heated appliance only by the handle.
After use, the surfaces of the heating elements will still have
►
some residual heat.
Always remove the plug from the mains power socket when
►
the appliance is not in use or when you want to clean it.
CAUTION!
Do not use an external timer switch or a separate remote
►
control system to operate the appliance.
Never leave the appliance unattended during operation.
►
Ensure that the appliance, the power cable and the plug
►
do not come into contact with sources of heat, such as
hotplates or open flames.
Only operate the appliance when the lid is in place.
►
Never operate the appliance when it is empty.
►
The appliance could be irreparably damaged.
Do not clean the appliance or any parts of it in the
►
dishwasher!
Note: No user action is required to switch the product
between 50 and 60 Hz. The product adapts automatically to
either 50 or 60 Hz.
SMA 500 F1
GB │ IE │
5 ■