Publicidad
Idiomas disponibles
Idiomas disponibles
4.3 Control Panel
3
Display: Displays the current setting
3
(duration of the timer, temperature,
power level).
- / +: Decrease/increase time (timer
4
function), temperature (temperature
mode) and level (power mode).
4.4
Details on the device
This instruction and when "H" is displayed, is to warn that the ceramic hob
may still be hot. Although the induction cooker itself does not generate any
heat during the cooking process, the temperature of the cooking utensil
does heat the hob!
ATTENTION
Adhere to the following safety instructions in order to avoid being burnt by the hot
appliance: Risk of burning due to hot surface!
Do not touch the surface of the ceramic hob while it is still hot ("H" is displayed)
Do not place any objects on the hot ceramic hob.
4.4.1 Overheating Protection Facility
The appliance is equipped with an overheating protection facility. If the temperature of
the appliance exceeds the critical limit the appropriate error message "E05" is displayed.
For safety reasons the appliance shuts off further power supply. After the cooling phase,
the unit can be switched on again.
PLEASE NOTE
You will fi nd more detailed information on error messages in the chapter entitled
„Fault indications".
4.5 Rating plate
The rating plate with the connection and performance data can be founded beneath
the device.
4
5
6
7
8
5
6
Level: Activate power mode
Temp.: Activate temperature mode
Timer: Activate timer function
On/Standby: Switch on the unit / set
the unit to standby mode.
CASO ProAdvanced E1
DE
EN
7
8
FR
IT
ES
NL
RUS
SE
PT
33
Publicidad
